Double End

Although color glass block are new, exciting, and cool to use in a window, wall or shower project there are still many questions about how to use colored blocks, where you can use them, and what product options are available. The 9 most frequently asked questions about this product and process are explained below.
1. What sizes, patterns, shapes, and designs can I get in color glass blocks? - Virtually any size, pattern, shape and design are available.
o American sizes include 4" x 8", 6" x 6", 6" x 8", 8" x 8" and 12" x 12". The most common, and usually most cost effective, block size to design with is 8" x 8". There are some metric sized colored blocks but their supply is more limited in the United States and the availability of colored shaped blocks to turn corners, angles and ends is virtually non-existent.
o Any shape (corner blocks, end blocks, angled blocks, radius block for rounded walls, and double ended block for step down walls) can be colored with a drilling and filling pigment process.
o Designs, patterns, and even beveled edged blocks can get standard or custom colors applied to them as well.
2. How many colors or finishes are available? Each manufacturer has their own line of blocks and mixing and matching colors from one manufacturer to the next is generally not recommended. Pittsburgh Corning carries 3 pastel colors in blue, rosa, and bronze. Color Glass Block has 8 standard colors which are very vibrant including a popular ruby red, topaz orange, emerald green, and sapphire dark blue. Custom colors can also be created to match or contrast with your decor. Some blocks can be purchased with a satin finish, or be sandblasted after the coloring process to create more of a muted coloring effect.
3. Can the color blocks be used on the outside as well as the inside? - Yes, the colored blocks are sealed and moisture free and safe to use for windows, walls, or showers whether they are exposed to outside elements or not. In fact, a really hot glass block outdoor sculpture was created using ruby red blocks in New Mexico.
4. How can color blocks be put together? - These blocks are put together the same way that standard clear units are assembled and installed. For window and straight wall assemblies a high quality and cost effective way to put the blocks together is by using pre-fabricated panel sections. These panels can be purchased with a vinyl stack spacer system to make setting one wall section on top of another wall section easy to do. This spacer system also has an interlocking design to tie the new glass wall into your existing walls - making your installation safe and secure. The color glass blocks can be put together with mortar or silicone to join the individual units. Contact a block window manufacturer for more tips on the advantages and disadvantages of these two approaches.
5. How long does it take to get color glass blocks? - Some color blocks in American size 8" x 8" and metric size 7 ½" x 7 ½" will be stocked and available for immediate shipment in a wavy design pattern- although the color selection will be more limited. For different sizes, shapes, and patterns allow a 2 to 3 week lead time from the placement of order to receiving your product.
6. Can the block be color matched? Yes. Custom colors can be created. Usually the best way to accomplish this is by sending in a sample of your fabric, wallpaper, glass tiles, etc. to match. A customer near Phoenix Arizona sent in a glass tile to create a maroon colored stripe in their glass block shower partition wall. This wall used 8" x 8" block, finished end blocks, and double ended blocks to step the wall down from 64" to 56" to 48" at its lowest point and the standard blocks and shaped blocks were colored.
7. How many color blocks should I use? Your design and look is ultimately up to you. If you have a room that is lacking in colored you might consider using color blocks for the entire window, wall, or kitchen bar project. Sometimes a stripe of color or randomly placed colored units add just the right amount of style and interest as well.
8. Can color glass blocks be personalized, engraved, or used in craft projects? Yes. Engraving color blocks with company logos, messages, or even for a fund raising project or craft is a great way to draw attention, interest, and uniqueness to your design.
9. Where can I get colored glass blocks? Do your research on line and look for companies knowledgeable who display these products on their sites. Knowledgeable suppliers in this niche are limited. The best sources are usually block window, wall, and shower suppliers who are deeply involved in the industry from supply, to fabrication, and through installation.
Mike Foti is President of Columbus Glass Block, Cleveland Glass Block, Mid America Glass Block Cincinnati, Dayton, Akron & Vice President of Eastern Glass Block New York & New Jersey - nationwide factory direct suppliers, fabricators & installers of color glass blocks for windows, walls, showers and bar projects.
Nationwide 877-668-5888
http://www.columbusglassblock.com/ - color glass block window, shower, & wall nationwide suppliers, window fabricators, and installers.
http://www.columbusglassblock.com/products-designer-and-color.aspx - color glass block & colored glass block windows, showers, walls, and bars
Are there printer cables that are double pronged on the end that plugs into the computer?
Are there printer cables that are double pronged on the end that plugs into the computer? So, for example, I have a cable that connects my desktop computer to my printer, but I always have to plug and unplug it everytime I want to print from my laptop. Does a printer cable exist that has two USB prongs on one end? Thank you.
The question is a little unclear. I think what you mean is that you want to be able to have your printer plugged in while your other devices are connected; is this right?
If so you can buy a usb hub, and this will give you more usb ports.
Double End bag
![]() |
![]() URBAN DECAY NAKED W/PRIMER POTION & 24/7 GLIDE- ON EYE DOUBLE-END PENCIL US $75.00
|
![]() 3/8" 2 FLUTE DOUBLE END END MILL US $.99
|
![]() SNAP-ON TOOLS FLARE NUT DOUBLE END 6-P WRENCH SET 3pc 3/8" - 1 1/8" US $75.00
|
![]() Super RARE 4" Adjustable Twin Wrench JAN. 1915 Double End US $99.99
|
![]() 10 Pc 1/8" Double End Titanium Drill Bits HSS US $5.98
|
![]() Snap On Metric Flare Nut Double End Wrench Set US $132.50
|
![]() Snap On Standard Flare Nut Double End Wrench Set US $70.00
|
![]() 1 PREMIUM SOLID CARBIDE END MILL 1/2 DIA DOUBLE END 4 FLUTES US $18.99
|
![]() Snap On Wrench Set Metric Flare Nut Double End 6pt 6pcs 9-21 mm RXFMS606B NEW A US $141.89
|
![]() Snap On Wrench Set Metric Flare Nut Double End 6pt 6pcs 9-21 mm RXFMS606B NEW B US $140.00
|
![]() Snap On Wrench Set Metric Flare Nut Double End 6pt 6pcs 9-21 mm RXFMS606B NEW C US $138.46
|
![]() SGS SOLID CARBIDE END MILL 1/2 DIA DOUBLE END 4 FLUTES US $18.99
|
![]() 2 SGS CARBIDE END MILLS 4 FLUTES DOUBLE END 5/16" DIA US $22.99
|
![]() 14 AUTOPOINT MECHANICAL PENCILS DOUBLE END FAT ADVERTISING US $9.99
|
![]() 6pc DEEP OFFSET DOUBLE BOX END RING WRENCH SET METRIC US $9.99
|
![]() Crescent 6-8" Diamalloy 10-12" Double End Wrench Lot Diamond Calk Horseshoe Co. US $29.99
|
![]() Snap On Tools Double Box End 12 Point XV-1618 USA 1/2" 9/16" Wrench US $15.00
|
![]() Vintage 1867 Detroit Brass Works Padlock,Unusual Lock,Double Hoop End,6.5"long#2 US $61.00
|
![]() Vintage 1867 Detroit Brass Works Padlock, Unusual Lock,Double Hoop End,6.5"long US $29.00
|
![]() DESIGNER DOUBLE SIDED HOOP EARRINGS W/BLUE TOPAZ "WEEK-END" REDUCTION US $33.99
|
![]() Antique 1700s-1800s Wrought Iron Meat Fork 3 Tine Rams Horn Double Curl End yqz US $15.50
|
![]() SNAP ON WRENCH LOT OF DOUBLE END 8MM 7MM MECHANICS MACHINIST TOOLS US $19.99
|
![]() 6pc DEEP OFFSET DOUBLE BOX END RING WRENCH SET SAE US $9.99
|
![]() 10 Pc 1/8" Double End Titanium Drill Bits HSS US $5.98
|
![]() Snap-on 1/2" & 9/16" spline double box end wrench GXDES1618A (EVA1354) US $6.32
|
![]() H-F GOLDMAN FOX 8 DOUBLE END PERIODONTAL KNIFE 3DE US $20.98
|
![]() Hu-Friedy GOLDMAN FOX 11 DOUBLE END PERIODONTAL KNIFE 3DE US $20.99
|
![]() Snap-on 9/16" & 5/8" spline double box end wrench GXDES1820A (EVA1358) US $6.32
|
![]() Fabric End Rolls Bias Assortment and Double Knit Polyester Lot US $25.99
|
![]() Stanley vintage double end block plane US $75.00
|
![]() 54 - Threaded Double End Studs, 3/8" - 16 x 2 1/2" and 1 1/4" - New in Bag US $9.99
|
![]() Vintage Continental Can Co Inc Passaic 30 143 double end pencil Autopoint redblk US $5.99
|
![]() *NEW Dura-Mill 5/32" 2 Flute Double End Mill - 2 PACK US $2.00
|
![]() Lot of 3 Cleveland C32986 Double End Mill 5/16" Dia x 3 1/2" Long REMACHINED US $4.99
|
![]() (4) NOS Weldon Square End Double End Mills 4 Flute RH Cut 15/32" w/ 1/2" Shank A US $19.99
|
![]() *NEW Dura-Mill 5/32" 2 Flute Double End Mill - 2 PACK US $2.00
|
![]() *NEW Dura-Mill 5/32" 2 Flute Double End Mill - 2 PACK US $2.00
|
![]() Dept 56 Double End Penguin Serving Tray, Metallic Silver & White, 13"x 6 1/4" US $14.00
|
![]() CARBIDE END MILL 1/2" x 1" x 4" 4-Flute DOUBLE ENDED End Mill US $25.00
|
![]() *NEW Dura-Mill 5/32" 2 Flute Double End Mill - 2 PACK US $3.36
|
![]() 5 NEW 5/32" DOUBLE END MILL 2 FLUTE HSS 70 US $8.95
|
![]() FINE ANTIQUE SILVER GILT DOUBLE SLIDING DIP PEN PENCIL BLOODSTONE SEAL END US $118.46
|
![]() S-K Lectrolite Double open end Wrench,19/32" X 11/16" Alloy #0-1922, USA US $3.99
|
![]() EYES BY DESIGN Double Ended Eye Pencils / Crayon - Black end & Brown end US $1.99
|
![]() Double End Pin Vise with Two Heads for Jeweler Tools US $.99
|
![]() Everlast Boxing Double End 25 lb Martial Arts Heavy Punching Bag Model: EB-E4665 US $35.00
|
![]() 150PCS SOLID COPPER DOUBLE HOOP END CRIMP BEADS US $.99
|
![]() 1 1/2 Inch Double End Wrench US $11.00
|
![]() Solid Carbide Double End Endmill (SGS -- USA) US $92.00
|
![]() Large Snap-on Double Open End Wrench US $.99
|
![]() NEW CARBIDE DOUBLE END MILL 5/16" X 2-1/2" X 1/2" LOC 5 FLUTE 1530 US $9.95
|
![]() New Double End Pin Vises Jewelry Watch Tool Steel Metal US $.99
|
![]() CONTROX - CARBIDE END MILL 1/2 x 1/2 x 5/8 x 3 4FL DOUBLE US $24.99
|
![]() Acculead 62924 HSS 2FL Double End Mill 3/4" US $12.50
|
![]() MACHINIST'S ASSORTED SIZE HSS DOUBLE ENDED END MILLS WITH SEAL & PEEL ASST FLUTE US $25.99
|
![]() INDIAN WAR ERA MEDICAL SURGICAL DOUBLE END LANCET US $.99
|
![]() DOUBLE DOOR STEEL 40' BOXCAR UP 113321, NO END #s NMRA COUPLERS, LIGHTLY USED US $3.99
|
![]() KRAFT TOOLS CC320 24"x8" Double End Airplane Groover 3/4" Bit US $75.00
|
![]() KRAFT TOOLS 24"x8" Double End Airplane Groover 1" Bit US $75.00
|
![]() 4 NATURAL CLEAR QUARTZ CRYSTAL POINT healing Double-end US $9.99
|
| Powered by phpBay Pro |
|
Progressive International Set of 5 Stainless-Steel Magnetic Measuring Spoons
$10.54 Progressive International is your source for the widest range of functional, inventive, and fun kitchen tools and great ideas put into practice. Our in-house designers spend hours in the kitchen coming up with ways to improve on a variety of traditional tasks and tools. Established in 1973, our commitment to quality and service allows us to offer a broad selection of quality kitchenware and other ... |
|
West Bend 41300 Hi-Rise Electronic Dual-Blade Breadmaker
$75.49 This West Bend 41300 Hi-Rise Bread Maker that feature dual knead blades that provides thorough dough kneading for a lighter taste and higher rise! The bread pan is horizontal and traditionally shape and can accommodate 4 different loaf sizes: 1 lb, 1.5 lb, 2 lb and 2.5 lb. The 11 digital settings include Basic, Quick, French, Sweet, Dough, and a special customizable homemade setting. This West Ben... |
|
Oxo SteeL Kitchen Tool and Utensil Rack
$9.00 Keep your favorite kitchen implements nearby and ready for use with this handy tool rack from Oxo's stainless-steel line. Made entirely from stainless steel, the rack comes with six fully independent sliding hooks. The hooks feature an open design compatible with Oxo's steel tools, Oxo Good Grips tools, and most other kitchen gadgets with a hole in the handle. The rack's brushed finish wipes down ... |
|
Elton John - Greatest Hits 1970-2002
$12.11 From \Your Song"""""" to """"""""The Train Doesn't Stop Here Anymore"""... |
|
50 Number Ones
$14.85 When George Strait's "She'll Leave You With a Smile" moved to the top of the country charts in early 2003, the handsome Lone Star crooner bested Conway Twitty for the most No. 1 singles by a solo artist. This collection of 50 chart-toppers, spanning 22 years, showcases the Cadillac of country singers at his best, blending traditional and contemporary stylings, but never straying too far from the c... |
|
The Singles Collection
$6.36 titolo-the singles collectionartista-kinks etichetta-sanctuary-n. dischi1data-27 settembre 2004supporto-cd audiogenere-pop e rock internazionale------brani1.long tall sally 2.you still want me 3.you really got me 4.all day and all of the night 5.tired of... |
|
Back Street [VHS]
$14.98 VHS Video approximately 1 hour 47 minutes**Stars Susan Hayward, John Gavin, Vera Miles, Charles Drake, Virginia Grey, Reginald Gardiner... |
|
A Stolen Life (1946) [VHS]
$19.98 ... |
|
Dying Young [VHS]
$2.41 Dying Young [VHS]... |
|
Mtech Extreme Tactical Folding Pocket Knife,With Aluminum Handle Knives Black
$4.65 This designer collector's knife features a metal fence design on the blade and a melt in your hand grip. The jet black blade is forged of 440 stainless steel and fits perfectly in you pocket or use the clip and have it at your side. Features: 5 inches closed 3.75 inches blade 8.75 inches overall 440 stainless steel blade; Metal fence graphic on blade; Perfectly cut grip to fit great in your hand.... |
Tags: bag, double, double end bag, double end bag installation, double end bag workout, double ended crochet hook, double ended crochet hook patterns, double ended punching bag, double endorsed checks, end, end_terrace, ended, terrace, training


US $75.00



























































0 Comments
No comments yet.
RSS feed for comments on this post. TrackBack URL
Leave a comment